Parameters |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Test Frequency |
1MHz |
Operating Supply Current |
220μA |
Power Dissipation |
150μW |
Max Supply Current |
380μA |
Throw Configuration |
SPST |
Turn On Delay Time |
130 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
700MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
115 ns |
Max Dual Supply Voltage |
16.5V |
-3db Bandwidth |
1GHz |
On-State Resistance (Max) |
190Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
1.1pF 1.2pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
130ns, 115ns |
Charge Injection |
-0.3pC |
Channel-to-Channel Matching (ΔRon) |
2.5 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height |
850μm |
Length |
3mm |
Width |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
475Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
150μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1211 |
Output |
SEPARATE OUTPUT |
ADG1211YCPZ-500RL7 Overview
This electronic part is conveniently packaged in 16-WFQFN Exposed Pad, CSP, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. A SPST - NC switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 1. Try searching with ADG1211 if you're looking for variants. Internally, this switch multiplexer has a resistance of 475Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 220μA current. When the digital multiplexer is charged above 380μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 16.5V. In the case of dual power supplies, you should connect at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electrical part can be operated at 12V voltage levels. It is possible to operate 4 inputs. It is possible to transfer data over a 700MHz-bandwidth.
ADG1211YCPZ-500RL7 Features
1 Channels
Switch Circuit: SPST - NC
220μA Supply Current
-3db Bandwidth: 1GHz
Bandwidth: 700MHz
ADG1211YCPZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG1211YCPZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Cell phones
- MP3 players
- Multiplexers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- PBXs
- Cross Connects
- Industrial control systems
- Digital cross connects (DSX-1)
- Data Acquisition Systems
- ISDN NT1/TA