banner_page

ADG1211YRUZ-REEL7

130ns, 115ns SPST - NC 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1211 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG1211YRUZ-REEL7
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 570
  • Description: 130ns, 115ns SPST - NC 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1211 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Switching BREAK-BEFORE-MAKE
Length 5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 190Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 150μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1211
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 12V
Polarity Non-Inverting
Number of Channels 1
Interface Parallel
Number of Circuits 1
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Operating Supply Current 220μA
Power Dissipation 150μW
Max Supply Current 380μA
Throw Configuration SPST
Turn On Delay Time 130 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Supply Type Dual, Single
Bandwidth 700MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 115 ns
Max Dual Supply Voltage 16.5V
-3db Bandwidth 1GHz
On-State Resistance (Max) 190Ohm
Min Dual Supply Voltage 4.5V
High Level Output Current 25mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 75 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 1.1pF 1.2pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 130ns, 115ns
Charge Injection -0.3pC
Channel-to-Channel Matching (ΔRon) 2.5 Ω
Crosstalk -90dB @ 1MHz

ADG1211YRUZ-REEL7 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~125°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SPST - NC switching circuits. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with ADG1211. Analog switches have 190Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V is the lowest voltage the electrical component should receive. This multiplexer would work with 220μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 380μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 12V voltage levels. The 4 inputs need to be operated in order to work. There are various bandwidths available for data transfer.

ADG1211YRUZ-REEL7 Features


1 Channels
Switch Circuit: SPST - NC
220μA Supply Current
-3db Bandwidth: 1GHz
Bandwidth: 700MHz

ADG1211YRUZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG1211YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • Microprocessor controlled systems
  • SONET
  • ISDN NT1/TA
  • Cable PC
  • Relay replacements
  • Sample hold systems
  • Intelligent PBX
  • SDH/SONET multiplexers
  • Cable Modem
  • DVD-R

Write a review

Note: HTML is not translated!
    Bad           Good