ADG1212SRU-EP-RL7

80ns, 100ns SPST - NO 190Ohm Analog Switches MAKE-BEFORE-BREAK ADG1212 16 Pins 100pA 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1212SRU-EP-RL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 920
Description: 80ns, 100ns SPST - NO 190Ohm Analog Switches MAKE-BEFORE-BREAK ADG1212 16 Pins 100pA 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	1.1pF 1.2pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	80ns, 100ns
Charge Injection	-0.3pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	105ns
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Digi-Reel®
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	150μW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	4
Terminal Pitch	0.635mm
Reach Compliance Code	not_compliant
Base Part Number	ADG1212
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	12V
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	150μW
Max Supply Current	380μA
Turn On Delay Time	130 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Bandwidth	700MHz
Turn-Off Delay Time	115 ns
Max Dual Supply Voltage	16.5V
-3db Bandwidth	1GHz
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA

ADG1212SRU-EP-RL7 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Digi-Reel? is used. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 16 terminations. 16 pins are injected to the electronic part body. SPST - NO switching circuits are used in these analog switch ics. If you are looking for variants of the digital switch, trying search with ADG1212. Internally, this switch multiplexer has a resistance of 190Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 16.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. It may damage the digital multiplexer if the voltage is higher than 380μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. In the case of dual power supplies, you should connect at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electronic component can function from 12V. Among the inputs that can be operated are the 4 inputs. This switch operates within the bandwidth of 700MHz.