ADG1212SRUZ-EP-RL7

80ns, 100ns SPST - NO 190Ohm DUAL Analog Switches MAKE-BEFORE-BREAK ADG1212 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1212SRUZ-EP-RL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 189
Description: 80ns, 100ns SPST - NO 190Ohm DUAL Analog Switches MAKE-BEFORE-BREAK ADG1212 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Additional Feature	ALSO OPERATE WITH 2 V TO 12 V SINGLE SUPPLY
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Base Part Number	ADG1212
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Input Voltage (Min)	-13.5V
Voltage - Supply, Single/Dual (±)	12V ±15V
Neg Supply Voltage-Nom (Vsup)	-15V
-3db Bandwidth	1GHz
On-State Resistance (Max)	190Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.1pF 1.2pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	80ns, 100ns
Charge Injection	-0.3pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω (Typ)
Crosstalk	-90dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Normal Position	NC
Signal Current-Max	0.025A
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant

ADG1212SRUZ-EP-RL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. The multiplexer consists of 4 circuits. Try searching for ADG1212 variants of the analog switch ic. The datasheets for the 16 pins explain the functions. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Additional features of the electronic component include: ALSO OPERATE WITH 2 V TO 12 V SINGLE SUPPLY.