ADG1212YCPZ-REEL7

130ns, 115ns SPST - NO 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1212 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1212YCPZ-REEL7
Package: 16-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 506
Description: 130ns, 115ns SPST - NO 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1212 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP(Kg)

Inquiry Now

Details

Tags

Parameters
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Height Seated (Max)	0.9mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	150μW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1212
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	150μW
Max Supply Current	380μA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	700MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	115 ns
Max Dual Supply Voltage	16.5V
-3db Bandwidth	1GHz
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.1pF 1.2pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	130ns, 115ns
Charge Injection	-0.3pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz

ADG1212YCPZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component like this is included in the 16 series. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with ADG1212 to find analog multiplexer variants. Analog switches have 190Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 380μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. With dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The electronic component can function from 12V. 700MHz bandwidths enable data to be transferred.