Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
190Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
150μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1212 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Power Dissipation |
150μW |
Max Supply Current |
380μA |
Throw Configuration |
SPST |
Turn On Delay Time |
130 ns |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
115 ns |
Max Dual Supply Voltage |
16.5V |
-3db Bandwidth |
1GHz |
On-State Resistance (Max) |
190Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
1.1pF 1.2pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
130ns, 115ns |
Charge Injection |
-0.3pC |
Channel-to-Channel Matching (ΔRon) |
2.5 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
125ns |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1212YRUZ-REEL Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for ADG1212 variants of the analog switch ic. It has an internal resistance of 190Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 5V voltage fed to the electrical part below 5V. Putting voltage greater than 380μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 12V operating voltages are supported by the electronic component.
ADG1212YRUZ-REEL Features
4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 1GHz
ADG1212YRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1212YRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Medical Instrumentation
- Communication systems
- Battery Powered Systems
- HDTV
- PBXs
- Power routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- CSU
- 65 V DACs