ADG1213YCPZ-500RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT +12 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG1213 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 1GHz |
| On-State Resistance (Max) | 190Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 1.1pF 1.2pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 130ns, 115ns |
| Charge Injection | -0.3pC |
| Channel-to-Channel Matching (ΔRon) | 2.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 125ns |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
ADG1213YCPZ-500RL7 Overview
This electronic part is conveniently packaged in 16-WFQFN Exposed Pad, CSP, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. A 4 circuit is present in this switch device. Using the ADG1213 search parameter, you can discover variants of the switch. In this analog multiplexer, the value is Multiplexer or Switches. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electronic part has additional features, such as: ALSO OPERATES AT +12 V SUPPLY.
ADG1213YCPZ-500RL7 Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 1GHz
Additional Features: ALSO OPERATES AT +12 V SUPPLY
ADG1213YCPZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG1213YCPZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Industrial
- Digital cross connects (DSX-1)
- Multi-Line E1 Interface Cards
- Avionics and Military Systems
- Wireless Local Loop
- FTTH
- MP3 players
- New designs requiring multiplexer functions
- DSUs
