ADG1213YCPZ-REEL7

130ns, 115ns SPST - NO/NC 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1213 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1213YCPZ-REEL7
Package: 16-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 811
Description: 130ns, 115ns SPST - NO/NC 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1213 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	150μW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1213
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	220μA
Power Dissipation	3.8mW
Max Supply Current	380μA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	1 GHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	115 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.1pF 1.2pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	130ns, 115ns
Charge Injection	-0.3pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Height Seated (Max)	0.9mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1213YCPZ-REEL7 Overview

Packed in 16-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~125°C TA is the extended operating temperature. There are 16 terminations totally. This electronic part offers high-quality output due to its 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. The electrical component body receives 16 pins. A SPST - NO/NC switching circuit is used for these analog switches. ADG1213 can be used to search for analog multiplexer variants. This digital multiplexer has 190Ohm internal resistance. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. 5V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 220μA current would suffice. If you put voltage higher than 380μA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages of 12V are compatible with the electrical part. 1 GHz bandwidths enable data to be transferred.