ADG1213YRUZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 190Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 150μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG1213 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Power Dissipation | 3.8mW |
| Max Supply Current | 380μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 130 ns |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 115 ns |
| Max Dual Supply Voltage | 16.5V |
| -3db Bandwidth | 1GHz |
| On-State Resistance (Max) | 190Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 1.1pF 1.2pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 130ns, 115ns |
| Charge Injection | -0.3pC |
| Channel-to-Channel Matching (ΔRon) | 2.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 125ns |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1213YRUZ-REEL Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~125°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 16 pins. SPST - NO/NC switching circuits are used in these analog switch ics. Try searching with ADG1213 to find analog multiplexer variants. Analog switches have 190Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 380μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. If you are using a dual power supply, you should attach at least 4.5V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 12V operating voltages.
ADG1213YRUZ-REEL Features
4 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 1GHz
ADG1213YRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1213YRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Battery Powered Systems
- Cable Modem
- Private Branch Exchange (PBX)
- Cellular phones
- Microwave transmission systems
- Wireless Local Loop
- Medical Instrumentation
- DVD-R
- SDH/SONET multiplexers
