ADG1219BRJZ-REEL7

105ns, 125ns SPDT 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1219 8 Pins 100pA 15V SOT-23-8

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1219BRJZ-REEL7
Package: SOT-23-8
Datasheet: PDF
Stock: 279
Description: 105ns, 125ns SPDT 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1219 8 Pins 100pA 15V SOT-23-8(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	SOT-23-8
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.3mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1219
Pin Count	8
Number of Outputs	2
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	2.3mW
Max Supply Current	190μA
Turn On Delay Time	105 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	520MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	125 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	77 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	3.3pF 5.1pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	105ns, 125ns
Charge Injection	0.1pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	200Ohm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1219BRJZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-8. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. There are 8 terminations totally. By its 1 channels, the electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of the design of the 8 series, this electronic part has been incorporated into the system. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG1219. In this multiplexer, the internal resistance is 200Ohm. The datasheets for the 8 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 5V. If you put voltage higher than 190μA on the digital multiplexer, damage may occur. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. The voltage should be at least 5V if you are using dual power supplies. Operating voltages range from 12V. There are 1 inputs to be operated. The transfer of data can be performed over 520MHz bandwidths. The Drain to Source resistance of this electronic component is 200Ohm. The analog switch ics has 2 outputs.