ADG1221BRMZ

130ns, 105ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1221 10 Pins 100pA 15V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1221BRMZ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 815
Description: 130ns, 105ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1221 10 Pins 100pA 15V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.3mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1221
Output	SEPARATE OUTPUT
Pin Count	10
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	2.9mW
Max Supply Current	190μA
Turn On Delay Time	170 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	960MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	105 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.2pF 2.2pF
On-state Resistance Match-Nom	2.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	130ns, 105ns
Charge Injection	0.1pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	140ns
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

ADG1221BRMZ Overview

Shipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 10. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. Electronic part bodies are injected with 10 pins. These analog multiplexers are built based on SPST - NO switching circuits. It consists of 2 circuits. Using the ADG1221 search parameter, you can discover variants of the switch. An switch multiplexer with 200Ohm internal resistance has a value of 200Ohm. For details about the functions of 10 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. Putting voltage greater than 190μA on the multiplexer may cause damage. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 5V. This analog switch ic utilizes SEPARATE OUTPUT output. There is a voltage range of 12V operating voltages for the electrical part. The data can be transferred over a wide range of bandwidths, called 960MHz bandwidths.