Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
200Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
2.3mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1221 |
Output |
SEPARATE OUTPUT |
Pin Count |
10 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Test Frequency |
1MHz |
Operating Supply Current |
140μA |
Power Dissipation |
2.9mW |
Max Supply Current |
190μA |
Throw Configuration |
SPST |
Turn On Delay Time |
170 ns |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
960MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
105 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
2.2pF 2.2pF |
On-state Resistance Match-Nom |
2.5Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
130ns, 105ns |
Charge Injection |
0.1pC |
Channel-to-Channel Matching (ΔRon) |
2.5 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
140ns |
Height Seated (Max) |
1.1mm |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1221BRMZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~125°C TA. A total of 10 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electronic part can be found in the 10 series. Based on SPST - NO switching circuits, these analog multiplexers work. This multiplexer is composed of 2 circuits. Use ADG1221 to search for variants of the digital switches. This digital multiplexer has 200Ohm internal resistance. The functions of 10 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 16.5V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. 5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 140μA. The analogue multiplexer may be damaged if voltage is greater than 190μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. If you are using a dual power supply, you should attach at least 5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical part is compatible with 12V operating voltages. A 960MHz-bandwidth can be used for data transfer.
ADG1221BRMZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NO
140μA Supply Current
Bandwidth: 960MHz
ADG1221BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1221BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Automotive applications
- Intelligent PBX
- PDH Multiplexers
- Fault Tolerant Systems
- SONET
- Medical systems
- Digital access cross connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Data switching