Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
200Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
2.3mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1223 |
Output |
SEPARATE OUTPUT |
Pin Count |
10 |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Test Frequency |
1MHz |
Operating Supply Current |
140μA |
Power Dissipation |
2.9mW |
Max Supply Current |
190μA |
Throw Configuration |
SPST |
Turn On Delay Time |
170 ns |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
960MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
105 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
200Ohm |
Min Dual Supply Voltage |
5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
2.2pF 2.2pF |
On-state Resistance Match-Nom |
2.5Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
130ns, 105ns |
Charge Injection |
0.1pC |
Channel-to-Channel Matching (ΔRon) |
2.5 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
140ns |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1223BRMZ-REEL7 Overview
Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there are 10 terminations. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 10 series is equipped with this electronic component. The analog switch ics are built using SPST - NO/NC switching circuits. Circuits number 2 make up this analogue multiplexer. Use ADG1223 to search for variants of the digital switches. In this multiplexer, the internal resistance is 200Ohm. To find out what the 10 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 5V. For this multiplexer to operate, 140μA current would be sufficient. If you put voltage higher than 190μA on the digital multiplexer, damage may occur. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 5V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. 12V operating voltages are supported by the electronic component. In 960MHz-bandwidths, data can be transferred.
ADG1223BRMZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NO/NC
140μA Supply Current
Bandwidth: 960MHz
ADG1223BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1223BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Digital cross connects (DSX-1)
- Precision data acquisition
- High speed data transmission line cards
- Cable Modem
- USB 1.1 signal switching circuits
- Voice over IP/DSL – Integrated Access Devices, Smart
- FTTH
- Channel Banks
- Optical Applications