ADG1233YRUZ

140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1233YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 904
Description: 140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Drain to Source Resistance	120Ohm
Height	1.2mm
Length	6.6mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.02mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1233
Pin Count	16
Number of Outputs	6
Operating Supply Voltage	12V
Number of Channels	3
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	6.02mW
Max Supply Current	475μA
Turn On Delay Time	140 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	900MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.8pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	140ns, 45ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE

ADG1233YRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 3 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. These analog multiplexers are built based on SPDT switching circuits. If you are looking for variants of the digital switch, trying search with ADG1233. This digital multiplexer has 190Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 16.5V. An effective Dual, Single supply digital multiplexer. 5V should be the lowest voltage fed to the electronic component. Put voltage above 475μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. With dual power supplies, you should attach at least 5V. 12V operating voltages are supported by the electronic component. There are 900MHz bandwidths for data transfer. This electrical component also includes additional features such as ALSO OPERATES AT 12V SINGLE SUPPLY. This electronic component presents a Drain to Source resistance of 120Ohm. The analogue multiplexer has 6 outputs.