ADG1233YRUZ-REEL7

140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1233YRUZ-REEL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 424
Description: 140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Switch Time (Ton, Toff) (Max)	140ns, 45ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.02mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1233
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	3
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	260μA
Power Dissipation	6.02mW
Max Supply Current	475μA
Turn On Delay Time	140 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	900MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.8pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT

ADG1233YRUZ-REEL7 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 3 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching for the analog switch ic with ADG1233 if you are looking for variants. This digital multiplexer has 190Ohm internal resistance. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 16.5V voltage to the switch device. An effective Dual, Single supply digital multiplexer. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 260μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 475μA. There is no problem with using dual supply voltage, but it should not exceed 16.5V. If you are using a dual power supply, you should attach at least 5V. The electronic component can function from 12V. There are 900MHz bandwidths for data transfer. There is also ALSO OPERATES AT 12V SINGLE SUPPLY to look out for in this electronic part. 6 outputs are included in the analogue multiplexer.