ADG1234YCPZ-REEL

140ns, 45ns SPDT 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1234 20 Pins 100pA 15V 20-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1234YCPZ-REEL
Package: 20-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 183
Description: 140ns, 45ns SPDT 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1234 20 Pins 100pA 15V 20-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.02mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1234
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	6.02mW
Max Supply Current	475μA
Turn On Delay Time	140 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	900MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.8pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	140ns, 45ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1234YCPZ-REEL Overview

Presented in 20-WFQFN Exposed Pad, CSP, this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 20. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 20 pins are injected into the electrical part body. Unlike digital switches, these are based on SPDT switching circuits. Try searching for ADG1234 variants of the analog switch ic. This digital multiplexer has 190Ohm internal resistance. The datasheets for the 20 pins explain the functions. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 5V as the lowest voltage for the electrical part. A digital multiplexer may suffer damage if voltage is applied above 475μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. With dual power supplies, you should attach at least 5V. 12V operating voltages can be used with this electrical part. 900MHz bandwidths enable data to be transferred. Check out the electrical component's additional features, such as the following: ALSO OPERATES AT 12V SINGLE SUPPLY. The analog switch ics has 8 outputs.