ADG1234YCPZ-REEL7

140ns, 45ns SPDT 190Ohm Analog Switches ADG1234 100pA 20-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1234YCPZ-REEL7
Package: 20-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 757
Description: 140ns, 45ns SPDT 190Ohm Analog Switches ADG1234 100pA 20-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Number of Pins	20
Supplier Device Package	20-LFCSP-WQ (4x4)
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Resistance	190Ohm
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Max Power Dissipation	6.02mW
Base Part Number	ADG1234
Number of Outputs	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	6.02mW
Max Supply Current	475μA
Number of Bits	4
Throw Configuration	SPDT
Turn On Delay Time	140 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	900MHz
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	16.5V
-3db Bandwidth	900MHz
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
High Level Output Current	24mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.8pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	140ns, 45ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5Ohm
Crosstalk	-85dB @ 1MHz
Drain to Source Resistance	190Ohm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1234YCPZ-REEL7 Overview

As the electronic part is packed in 20-WFQFN Exposed Pad, CSP, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Around -40°C~125°C TA is the extended operating temperature. Due to its 4 channels, the electrical component produces high-quality output. The analog switch ics are built using SPDT switching circuits. A 4 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG1234. The internal resistance of this digital multiplexer is 190Ohm. For functions related to 20 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 5V. A digital multiplexer may suffer damage if voltage is applied above 475μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. You should attach at least 5V voltage if you are using dual power supply. Operating voltages of 12V are compatible with the electrical part. Operating 4 inputs is required. There are various bandwidths available for data transfer. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. A Drain to Source resistance of 190Ohm is shown for this electronic part. There are 8 outputs on the analogue multiplexer. It is possible to purchase a 20-LFCSP-WQ (4x4) package from suppliers. The switch device is capable of conducting in a 4-bit mode.