ADG1234YRUZ

140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1234 20 Pins 100pA 15V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1234YRUZ
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 574
Description: 140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1234 20 Pins 100pA 15V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.02mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1234
Pin Count	20
Number of Outputs	8
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Nominal Supply Current	420μA
Power Dissipation	6.02mW
Max Supply Current	475μA
Turn On Delay Time	140 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	900MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.8pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	140ns, 45ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	120Ohm
Height	1.2mm
Length	6.6mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1234YRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 20 terminations. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. An injection of 20 pins is performed into the body of the electrical component. Based on SPDT switching circuits, these analog multiplexers work. Try searching for ADG1234 variants of the analog switch ic. As far as internal resistance is concerned, it has 190Ohm. To find out what the functions of 20 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 5V. If put voltage greater than 475μA on the device, damage may be caused to the analogue multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. The voltage should be at least 5V if you are using dual power supplies. The electrical part can be operated at 12V voltage levels. There are various bandwidths available for data transfer. This electrical component also includes additional features such as ALSO OPERATES AT 12V SINGLE SUPPLY. A Drain to Source resistance of 120Ohm is shown for this electronic part. A analog switch ics with 8 outputs is included.