ADG1234YRUZ-REEL7

140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1234 20 Pins 100pA 15V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1234YRUZ-REEL7
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 864
Description: 140ns, 45ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1234 20 Pins 100pA 15V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.02mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1234
Output	SEPARATE OUTPUT
Pin Count	20
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	260μA
Power Dissipation	6.02mW
Max Supply Current	475μA
Turn On Delay Time	140 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	900MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.8pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	140ns, 45ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.2mm
Length	6.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1234YRUZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 20 terminations. This electronic part offers high-quality output due to its 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 20 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPDT switching circuits. 4 circuits are used in this analogue multiplexer. Try searching with ADG1234 if you're looking for variants. Internally, this switch multiplexer has a resistance of 190Ohm. For functions related to 20 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 5V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 260μA current. It may damage the digital multiplexer if the voltage is higher than 475μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A voltage of 12V can be used to operate the electronic component. 900MHz-bandwidths can be used to transfer data between multiplexers. Check out the electrical component's additional features, such as the following: ALSO OPERATES AT 12V SINGLE SUPPLY.