ADG1236YRUZ-REEL7

150ns, 90ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1236 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1236YRUZ-REEL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 389
Description: 150ns, 90ns SPDT 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1236 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.5mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1236
Pin Count	16
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	170μA
Power Dissipation	3.5mW
Max Supply Current	230μA
Turn On Delay Time	150 ns
Supply Type	Dual, Single
Bandwidth	1 GHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	90 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.6pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	150ns, 90ns
Charge Injection	-1pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±)	±15V
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1236YRUZ-REEL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 2 channels. A 15V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. These analog multiplexers are built based on SPDT switching circuits. Try searching for ADG1236 variants of the analog switch ic. A 190Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. For this digital switch to work, 170μA current would suffice. Putting voltage greater than 230μA on the multiplexer may cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 5V to your dual power supply. There is a voltage range of 12V operating voltages for the electrical part. This switch operates within the bandwidth of 1 GHz. The analog switch ics has 4 outputs.