ADG1308BRUZ

100ns, 100ns 210Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1308 16 Pins 1nA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1308BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 137
Description: 100ns, 100ns 210Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1308 16 Pins 1nA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	210Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1308
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	2nA
Nominal Supply Current	220μA
Throw Configuration	DPST
Turn On Delay Time	120 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Bandwidth	500MHz
Supply Current-Max (Isup)	2mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	210Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	15pF 20pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	100ns, 100ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	130Ohm
Signal Current-Max	0.03A
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1308BRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. An extended operating temperature of -40°C~105°C TA degrees Celsius. The total number of terminations is 16. By its 8 channels, the electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. There are 1 circuits in this switch device. Using the ADG1308 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 210Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. A voltage higher than 16.5V should not normally be supplied to the switches. In order for the electronic part to function properly, the lowest voltage should be 5V. For this multiplexer to operate, 2nA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIf you are using dual power supplies, you should attach at least 5V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A voltage of 15V can be used to operate the electronic component. There are 8 inputs to be operated. There are 500MHz bandwidths for data transfer. Resistivity from Drain to Source is 130Ohm for this electronic part.