Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
210Ohm |
Terminal Finish |
Matte Tin (Sn) |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1308 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Operating Supply Current |
220μA |
Propagation Delay |
130 ns |
Turn On Delay Time |
110 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
500MHz |
Supply Current-Max (Isup) |
2mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
210Ohm |
Min Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
15pF 20pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Time (Ton, Toff) (Max) |
100ns, 100ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-80dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.03A |
Length |
9.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1308BRZ-REEL7 Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -40°C~105°C TA are extended for operation. In total, 16 terminations have occurred. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching for ADG1308 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 210Ohm. For functions related to 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 5V. For this multiplexer to operate, 220μA current would be sufficient. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 5V. Operating voltages range from 15V. A 8 input needs to be operated. There are 500MHz bandwidths for data transfer.
ADG1308BRZ-REEL7 Features
8 Channels
220μA Supply Current
Bandwidth: 500MHz
ADG1308BRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1308BRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Transmit
- Modems
- Multi-Line E1 Interface Cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- HDTV
- High-Voltage
- Communications systems
- E1 Multiplexer
- Audio and video switching
- Wireless Local Loop