Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
210Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1309 |
Pin Count |
16 |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Throw Configuration |
4PST |
Propagation Delay |
130 ns |
Turn On Delay Time |
110 ns |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
500MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
210Ohm |
Min Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 15pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
100ns, 100ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-80dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
150ns |
Signal Current-Max |
0.03A |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1309BRZ Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature extended to -40°C~105°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is part of the design of the 16 series that this electronic component is included. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. Search with ADG1309 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 210Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 5V should be applied to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. If you are using a dual power supply, you should attach at least 5V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The electrical part can be operated at 15V voltage levels. There are 500MHz bandwidths for data transfer.
ADG1309BRZ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 500MHz
ADG1309BRZ Applications
There are a lot of Analog Devices Inc. ADG1309BRZ Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Medical
- CSU
- Communication systems
- Channelized and Unchannelized DS3 applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- RGB switches
- SONET/SDH ADM
- PCMCIA cards
- Fiber In The Loop (FITL)