ADG1309BRZ-REEL7
| Parameters | |
|---|---|
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 220μA |
| Throw Configuration | 4PST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 110 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 210Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 15pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 100ns, 100ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 210Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1309 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Interface | Parallel |
ADG1309BRZ-REEL7 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 4:1. An extended operating temperature of -40°C~105°C TA degrees Celsius. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. These analog multiplexers are built based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. ADG1309 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 210Ohm. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 5V. For this digital switch to work, 220μA current would suffice. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VThe voltage should be at least 5V if you are using dual power supplies. Operating voltages range from 15V. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 500MHz bandwidths.
ADG1309BRZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
220μA Supply Current
Bandwidth: 500MHz
ADG1309BRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1309BRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Avionics
- Medical systems
- HDTV
- Audio signal routing
- Video switching
- Mechanical reed relay replacement
- ISDN NT1/TA
- SDH
- CSU
