banner_page

ADG1311YRZ

125ns, 50ns SPST - NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1311 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG1311YRZ
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 960
  • Description: 125ns, 50ns SPST - NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1311 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~105°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 200Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 4.8mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1311
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 12V
Number of Channels 1
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Nominal Supply Current 320μA
Power Dissipation 4.8mW
Max Supply Current 380μA
Turn On Delay Time 125 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 12V ±15V
Supply Type Dual, Single
Bandwidth 600MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 200Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 125ns, 50ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 180ns
Switch-off Time-Max 60ns
Drain to Source Resistance 200Ohm
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADG1311YRZ Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~105°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. Unlike digital switches, these are based on SPST - NC switching circuits. Use ADG1311 to search for variants of the digital switches. This digital multiplexer has 200Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 5V as the lowest voltage for the electrical part. The switch multiplexer may be damaged if it is exposed to voltage greater than 380μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. The voltage should be at least 5V if you are using dual power supplies. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical part can be operated at 12V voltage levels. There are 4 inputs to be operated. 600MHz-bandwidths can be used to transfer data between multiplexers. Drain to Source resistance is 200Ohm.

ADG1311YRZ Features


1 Channels
Switch Circuit: SPST - NC
Bandwidth: 600MHz
Drain-to-Source resistance: 200Ohm

ADG1311YRZ Applications


There are a lot of Analog Devices Inc. ADG1311YRZ Analog Switches & Multiplexers ICs applications.

  • Video switching
  • SONET
  • CSU
  • Optical Applications
  • Wireless Local Loop
  • Sample-and-hold systems
  • Fiber In The Loop (FITL)
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • RGB switches
  • Audio/video switches

Write a review

Note: HTML is not translated!
    Bad           Good