ADG1312YRZ-REEL7

125ns, 50ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1312 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1312YRZ-REEL7
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 840
Description: 125ns, 50ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1312 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Throw Configuration	SPST
Turn On Delay Time	125 ns
Supply Type	Dual, Single
Bandwidth	600MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	125ns, 50ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	180ns
Switch-off Time-Max	60ns
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1312
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	220μA
Power Dissipation	4.8mW
Max Supply Current	380μA

ADG1312YRZ-REEL7 Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around -40°C~105°C TA. A total of 16 terminations have been recorded. Due to its 4 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for ADG1312 variants of the analog switch ic. As far as internal resistance is concerned, it has 200Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16.5V to a switch device. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 5V. For this digital switch to work, 220μA current would suffice. When the digital multiplexer is charged above 380μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. In the case of dual power supplies, you should connect at least 5V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A voltage of 12V can be used to operate the electronic component. This switch operates within the bandwidth of 600MHz.