ADG1313YRUZ-REEL7

125ns, 50ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1313 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1313YRUZ-REEL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 893
Description: 125ns, 50ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1313 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1313
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	220μA
Power Dissipation	4.8mW
Max Supply Current	380μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Supply Type	Dual, Single
Bandwidth	600MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	125ns, 50ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	180ns
Switch-off Time-Max	60ns
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1313YRUZ-REEL7 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~105°C TA are extended for operation. The total number of terminations is 16. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. Look for analog switch ic variants by searching with ADG1313. In this multiplexer, the internal resistance is 200Ohm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 5V. 220μA current would be enough for this multiplexer to operate. It may damage the digital multiplexer if the voltage is higher than 380μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. You should attach at least 5V voltage if you are using dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical part can be operated at 12V voltage levels. There are various bandwidths available for data transfer.