ADG1313YRZ

125ns, 50ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1313 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1313YRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 771
Description: 125ns, 50ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1313 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1313
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.8mW
Max Supply Current	380μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Bandwidth	600MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	125ns, 50ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	180ns
Switch-off Time-Max	60ns
Drain to Source Resistance	130Ohm
Height	1.5mm
Length	10mm
Width	4mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1313YRZ Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -40°C~105°C TA are extended for operation. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO/NC switching circuits. Try searching with ADG1313 to find analog multiplexer variants. There is 200Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 16.5V voltage to the switch device. An effective Dual, Single supply digital multiplexer. 5V is the lowest voltage that should be fed to the electronic electronic part. Putting voltage greater than 380μA on the multiplexer may cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. In the case of dual power supplies, you should connect at least 5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electrical part can be operated at 12V voltage levels. In 600MHz-bandwidths, data can be transferred. There is 130Ohm resistance between the Drain and Source on this part.