ADG1334BRSZ-REEL

130ns, 85ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1334 20 Pins 10nA 15V 20-SSOP (0.209, 5.30mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1334BRSZ-REEL
Package: 20-SSOP (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 715
Description: 130ns, 85ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1334 20 Pins 10nA 15V 20-SSOP (0.209, 5.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1334
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	260μA
Power Dissipation	6.02mW
Max Supply Current	400μA
Throw Configuration	SPDT
Turn On Delay Time	130 ns
Number of Inputs	4
Supply Type	Dual, Single
Bandwidth	700MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	85 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	130ns, 85ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	2mm
Length	7.2mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.02mW

ADG1334BRSZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-SSOP (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~105°C TA. In total, 20 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 20 pins. SPST - NO/NC switching circuits are used in these analog switch ics. Search with ADG1334 if you are looking for analog multiplexer variants. There is 200Ohm internal resistance in this digital multiplexer. To find out what the functions of 20 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. In order for the electronic part to function properly, the lowest voltage should be 5V. In order to operate this switch device, it would need a current of 260μA. When the digital multiplexer is charged above 400μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. For dual power supplies, a voltage of at least 5V should be attached. The electrical part can be operated at 12V voltage levels. Operating the 4 inputs requires 4 inputs. 700MHz-bandwidths can be used to transfer data between multiplexers. The analog switch ics includes 8 outputs.