ADG1401BRMZ-REEL7

150ns, 150ns SPST - NO 1.3Ohm Analog Switches BREAK-BEFORE-MAKE ADG1401 8 Pins 400pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1401BRMZ-REEL7
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 217
Description: 150ns, 150ns SPST - NO 1.3Ohm Analog Switches BREAK-BEFORE-MAKE ADG1401 8 Pins 400pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	1.3Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.44mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1401
Pin Count	8
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	60μA
Power Dissipation	1.44mW
Max Supply Current	95μA
Throw Configuration	SPST
Turn On Delay Time	150 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	120MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.3Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	400pA
Channel Capacitance (CS(off), CD(off))	36pF 41pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Insertion Loss (dB)	0.08 dB
Charge Injection	-12pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	375ns
Normal Position	NO
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1401BRMZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~125°C TA extended. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is part of the design of the 8 series that this electronic component is included. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with ADG1401 if you're looking for variants. This digital multiplexer has 1.3Ohm internal resistance. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. This multiplexer would work with 60μA current. When the digital multiplexer is charged above 95μA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIf you are using dual power supplies, you should attach at least 4.5V. A voltage of 12V can be used to operate the electronic component. A 1 input needs to be operated. 120MHz bandwidths enable data to be transferred.