ADG1404YCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 30μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG1404 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 30μW |
| Max Supply Current | 1μA |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 1.8Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 550pA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 90pF |
| On-state Resistance Match-Nom | 0.13Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 120ns, 135ns |
| Charge Injection | -20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -82dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1404YCPZ-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad, CSP. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. There are 16 terminations totally. Due to its 4 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. A SP4T switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with ADG1404. It has an internal resistance of 1.8Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. The lowest voltage fed to the electronic component should be 5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. When using dual power supplies, you should attach at least 4.5V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Operating the 4 inputs requires 4 inputs. A 55MHz-bandwidth can be used for data transfer.
ADG1404YCPZ-REEL Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 55MHz
ADG1404YCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1404YCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- PBX interfaces
- Cable Modem
- Cellular phones
- ATM
- DVD-R
- Routers
- USB 1.1 signal switching circuits
- Avionics and Military Systems
- Audio and video signal routing
