ADG1404YCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 30μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG1404 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 30μW |
| Max Supply Current | 1μA |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 1.8Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 550pA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 90pF |
| On-state Resistance Match-Nom | 0.13Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 120ns, 135ns |
| Charge Injection | -20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -82dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1404YCPZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with ADG1404. In this multiplexer, the internal resistance is 1.8Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A low voltage of 5V should be applied to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIn the case of dual power supplies, you should connect at least 4.5V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There are various bandwidths available for data transfer.
ADG1404YCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 55MHz
ADG1404YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1404YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Residential Gateways, Home Gateway/Router
- Public switching systems
- Isolation
- Multiplexers
- T1/E1 Terminals
- New designs requiring multiplexer functions
- Battery-powered systems
- E1 Network Equipment
- Cellular phones
