Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
1.8Ohm |
Max Power Dissipation |
30μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1404 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
170μA |
Nominal Supply Current |
1nA |
Power Dissipation |
30μW |
Max Supply Current |
1μA |
Logic Function |
Multiplexer |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
55MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
1.8Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
550pA |
Channel Capacitance (CS(off), CD(off)) |
23pF 90pF |
On-state Resistance Match-Nom |
0.13Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
120ns, 135ns |
Charge Injection |
-20pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-82dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Max Junction Temperature (Tj) |
150°C |
Signal Current-Max |
0.03A |
On-State Resistance |
1.5Ohm |
Height |
1.2mm |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1404YRUZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Total terminations are 14. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 14 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SP4T switching circuits. There are 1 circuits in this switch device. ADG1404 can be used to search for analog multiplexer variants. It has an internal resistance of 1.8Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. Multiplexers should not be powered above 16.5V in normal situations. The digital multiplexer has a low cost Dual, Single supply. 4.5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 170μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. If you are using dual power supplies, you should attach at least 4.5V. There is a voltage range of 12V operating voltages for the electrical part. Among the inputs that can be operated are the 4 inputs. It is possible to transfer data over a 55MHz-bandwidth.
ADG1404YRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
170μA Supply Current
Bandwidth: 55MHz
ADG1404YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1404YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Precision test equipment
- Digital cross connects (DSX-1)
- Access Concentrators
- FTTH
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SDH/SONET multiplexers
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDAs
- Signal routing between systems