Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
32-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
32 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Resistance |
11.5Ohm |
Terminal Finish |
MATTE TIN |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
280μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1406 |
Pin Count |
32 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
16 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Power Dissipation |
280μW |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Bandwidth |
60MHz |
Supply Current-Max (Isup) |
0.4mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
98 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
11.5Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 90pf |
On-state Resistance Match-Nom |
1.3Ohm |
Switch Time (Ton, Toff) (Max) |
110ns, 120ns |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
550m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
445ns |
Switch-off Time-Max |
370ns |
Drain to Source Resistance |
11.5Ohm |
Signal Current-Max |
0.03A |
Length |
5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1406BCPZ-REEL7 Overview
As the electronic part is packed in 32-WFQFN Exposed Pad, CSP, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 16:1. Operating temperature extended to -40°C~125°C TA. Total terminations are 32. This electronic part offers high-quality output due to its 16 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 32 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Using the ADG1406 search parameter, you can discover variants of the switch. This digital multiplexer has 11.5Ohm internal resistance. Datasheets for 32 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. The lowest voltage fed to the electronic component should be 5V. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical part can be operated at 12V voltage levels. There are various bandwidths available for data transfer. The Drain to Source resistance of this electronic component is 11.5Ohm.
ADG1406BCPZ-REEL7 Features
16 Channels
Bandwidth: 60MHz
Drain-to-Source resistance: 11.5Ohm
ADG1406BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1406BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- PDAs
- Medical
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Remote Powered Equipment
- PBXs
- Microprocessor Controlled Analog Systems
- Industrial
- Audio and video routing
- Audio and video signal routing