ADG1406BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 11.5Ohm |
| Max Power Dissipation | 280μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1406 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 150μA |
| Power Dissipation | 280μW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 60MHz |
| Supply Current-Max (Isup) | 0.4mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 98 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 11.5Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 90pf |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Time (Ton, Toff) (Max) | 110ns, 120ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 550m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 445ns |
| Switch-off Time-Max | 370ns |
| Signal Current-Max | 0.03A |
| Length | 9.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1406BRUZ-REEL7 Overview
Presented in 28-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. 28 terminations have been made so far. High-quality output is provided by the electronic component's 16 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electronic part can be found in the 28 series. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with ADG1406 if you are looking for variants. An switch multiplexer with 11.5Ohm internal resistance has a value of 11.5Ohm. The datasheets for the 28 pins explain the functions. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V should be the lowest voltage fed to the electronic component. 150μA current would be enough for this multiplexer to operate. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. If you are using dual power supplies, you should attach at least 4.5V. Operating voltages of 12V are compatible with the electrical part. There are 60MHz bandwidths for data transfer.
ADG1406BRUZ-REEL7 Features
16 Channels
150μA Supply Current
Bandwidth: 60MHz
ADG1406BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1406BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Public switching systems
- E1 Multiplexer
- Battery Powered Instruments
- Isolation
- Precision instrumentation
- Medical
- SDH
- Data Acquisition Systems
- Industrial
