ADG1407BRUZ

110ns, 120ns 11.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1407 28 Pins 250pA 5V 28-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1407BRUZ
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 809
Description: 110ns, 120ns 11.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1407 28 Pins 250pA 5V 28-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	11.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	280μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1407
Pin Count	28
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	280μA
Power Dissipation	280μW
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Bandwidth	110MHz
Supply Current-Max (Isup)	0.4mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	98 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	11.5Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 45pF
On-state Resistance Match-Nom	1.3Ohm
Switch Time (Ton, Toff) (Max)	110ns, 120ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	550m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	445ns
Switch-off Time-Max	370ns
Drain to Source Resistance	25Ohm
Signal Current-Max	0.03A
Height	1.2mm
Length	9.8mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1407BRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 28-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. 8:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 28. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. It is part of the design of the 28 series that this electronic component is included. A 2 circuit is present in this switch device. Using the ADG1407 search parameter, you can discover variants of the switch. A 11.5Ohm internal resistance characterizes this multiplexer. To find out what the 28 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. 5V is the lowest voltage that should be fed to the electronic electronic part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. With dual power supplies, you should attach at least 4.5V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. The electrical part can be operated at 12V voltage levels. In order to operate the 16 inputs, there are several steps to follow. 110MHz bandwidths enable data to be transferred. The Drain to Source resistance of this electronic component is 25Ohm.