ADG1408YCPZ-REEL7

120ns, 120ns 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1408 16 Pins 200pA 5V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1408YCPZ-REEL7
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 109
Description: 120ns, 120ns 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1408 16 Pins 200pA 5V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.9mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1408
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	220μA
Power Dissipation	4.9mW
Number of Bits	8
Throw Configuration	SPST
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Bandwidth	60MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	14pF 80pF
On-state Resistance Match-Nom	0.78Ohm
Switch Time (Ton, Toff) (Max)	120ns, 120ns
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	330ns
Signal Current-Max	0.03A
Length	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1408YCPZ-REEL7 Overview

Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Temperatures around -40°C~125°C TA are extended for operation. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 16 pins. Circuits number 1 make up this analogue multiplexer. Search with ADG1408 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 4.7Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. It is recommended to use 5V as the lowest voltage for the electrical part. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. If you are using dual power supplies, you should attach at least 4.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. 12V operating voltages are supported by the electronic component. The transfer of data can be performed over 60MHz bandwidths. It conducts in a 8-bit manner.