ADG1408YRUZ

120ns, 120ns 4.7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1408 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1408YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 481
Description: 120ns, 120ns 4.7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1408 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.9mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1408
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	1μA
Power Dissipation	4.9mW
Number of Bits	8
Throw Configuration	SPST
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Bandwidth	60MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	14pF 80pF
On-state Resistance Match-Nom	0.78Ohm
Switch Time (Ton, Toff) (Max)	120ns, 120ns
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	330ns
Signal Current-Max	0.03A
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1408YRUZ Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. The circuits in this analogue multiplexer number 1. ADG1408 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 4Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. There should be 5V voltage fed to the electrical part below 5V. There is no problem with using dual supply voltage, but it should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating voltages of 12V are compatible with the electrical part. 60MHz-bandwidths can be used to transfer data between multiplexers. It can conduct 8-bit signals.