ADG1408YRUZ-REEL
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.7Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 4.9mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1408 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 220μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 4.9mW |
| Throw Configuration | SPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 4.7Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 80pF |
| On-state Resistance Match-Nom | 0.78Ohm |
| Switch Time (Ton, Toff) (Max) | 120ns, 120ns |
| Charge Injection | -50pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 330ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
ADG1408YRUZ-REEL Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. A 5V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG1408. A 4.7Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 220μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. A voltage of 12V can be used to operate the electronic component. The 8 inputs need to be operated in order to work. The transfer of data can be performed over 60MHz bandwidths.
ADG1408YRUZ-REEL Features
8 Channels
220μA Supply Current
Bandwidth: 60MHz
ADG1408YRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1408YRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Audio signal routing
- Cable PC
- Wireless Local Loop
- Access Concentrators
- Modems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Routers
- RGB switches
- DSUs
