ADG1408YRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.7Ohm |
| Max Power Dissipation | 4.9mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1408 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 220μA |
| Power Dissipation | 4.9mW |
| Throw Configuration | SPST |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 4.7Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 80pF |
| On-state Resistance Match-Nom | 0.78Ohm |
| Switch Time (Ton, Toff) (Max) | 120ns, 120ns |
| Charge Injection | -50pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 330ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1408YRUZ-REEL7 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Operational temperature extended around -40°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. There are 1 circuits in this multiplexer. Using the ADG1408 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4.7Ohm. For functions related to 16 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 16.5V. A cost-effective Dual, Single supply type analogue multiplexer. 5V is the lowest voltage that should be fed to the electronic electronic part. 220μA current would be enough for this multiplexer to operate. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. There is a voltage range of 12V operating voltages for the electrical part. A 60MHz-bandwidth can be used for data transfer.
ADG1408YRUZ-REEL7 Features
8 Channels
220μA Supply Current
Bandwidth: 60MHz
ADG1408YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1408YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Medical Instrumentation
- Switching Systems
- Sample hold systems
- Channel Banks
- Digital access cross connects
- Digital Cross-Connects
- Microprocessor Controlled Analog Systems
- Intelligent PBX
- Cellular phones
