ADG1409SRUZ-EP
| Parameters | |
|---|---|
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG1409 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 4.9mW |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 115MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 4.7Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 40pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 120ns, 120ns |
| Charge Injection | -50pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω (Typ) |
| Crosstalk | -70dB @ 1MHz |
| Switch-on Time-Max | 440ns |
| Switch-off Time-Max | 370ns |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
ADG1409SRUZ-EP Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 4:1. Temperatures around -55°C~125°C are extended for operation. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching for the analog switch ic with ADG1409 if you are looking for variants. Datasheets for functions of 16 pins are available. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. 115MHz-bandwidths can be used to transfer data between multiplexers.
ADG1409SRUZ-EP Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 115MHz
ADG1409SRUZ-EP Applications
There are a lot of Analog Devices Inc. ADG1409SRUZ-EP Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Medical systems
- Cross Connects
- Remote wireless modules
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital cross connects (DSX-1)
- PCMCIA cards
- DSUs
- Channelized and Unchannelized DS3 applications
