Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.7Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
4.9mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1409 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Operating Supply Current |
220μA |
Power Dissipation |
4.9mW |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
115MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
100 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
4.7Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
14pF 40pF |
On-state Resistance Match-Nom |
0.78Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
120ns, 120ns |
Charge Injection |
-50pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
330ns |
Signal Current-Max |
0.03A |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1409YRUZ-REEL Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. SP4T switching circuits are used in these analog switch ics. It consists of 2 circuits. ADG1409 can be used to search for analog multiplexer variants. There is 4.7Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 5V. For this multiplexer to operate, 220μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. The voltage should be at least 4.5V if you are using dual power supplies. Operating voltages range from 12V. Operating the 8 inputs requires 8 inputs. The transfer of data can be performed over 115MHz bandwidths.
ADG1409YRUZ-REEL Features
4 Channels
Switch Circuit: SP4T
220μA Supply Current
Bandwidth: 115MHz
ADG1409YRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1409YRUZ-REEL Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- 65 V DACs
- Video switching
- Relay replacements
- HDTV
- Remote Powered Equipment
- Audio signal routing
- DVD-R
- Sample-and-hold systems
- Medical systems