Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-VQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1.8Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
4.97mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1411 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Test Frequency |
1MHz |
Power Dissipation |
4.97mW |
Max Supply Current |
380μA |
Turn On Delay Time |
150 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
170MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
1.8Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
550pA |
Channel Capacitance (CS(off), CD(off)) |
23pF 23pF |
On-state Resistance Match-Nom |
0.13Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
150ns, 120ns |
Insertion Loss (dB) |
-0.35 dB |
Charge Injection |
-20pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-100dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
510ns |
Switch-off Time-Max |
380ns |
Normal Position |
NC |
Height Seated (Max) |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1411YCPZ-REEL7 Overview
Packed in 16-VQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. Use ADG1411 to search for variants of the digital switches. This digital multiplexer has 1.8Ohm internal resistance. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V should be the lowest voltage fed to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 380μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. If you are using a dual power supply, you should attach at least 4.5V. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical part can be operated at 12V voltage levels. In order to operate the 4 inputs, there are several steps to follow. There are 170MHz bandwidths for data transfer.
ADG1411YCPZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 170MHz
ADG1411YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1411YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Channel Banks
- High reliability control systems
- Multiplexers
- Industrial and process control systems
- Low-Voltage
- Battery Powered Instruments
- RGB switches
- PDH Multiplexers
- Sample-and-hold systems