ADG1411YRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 4.97mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG1411 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Test Frequency | 1MHz |
| Operating Supply Current | 220μA |
| Power Dissipation | 4.97mW |
| Max Supply Current | 380μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 1.8Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 550pA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 23pF |
| On-state Resistance Match-Nom | 0.13Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Insertion Loss (dB) | -0.35 dB |
| Charge Injection | -20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 510ns |
| Switch-off Time-Max | 380ns |
| Normal Position | NC |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1411YRUZ-REEL7 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. As part of its design, the 16 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Search with ADG1411 if you are looking for analog multiplexer variants. There is 1.8Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. An effective Dual, Single supply digital multiplexer. 5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 220μA. A voltage higher than 380μA may cause damage to the switch multiplexer. There is no problem with using dual supply voltage, but it should not exceed 16.5V. If you are using a dual power supply, you should attach at least 4.5V. This analog switch ic utilizes SEPARATE OUTPUT output. A voltage of 12V can be used to operate the electronic component. The electrical component supports 4 inputs. There are various bandwidths available for data transfer.
ADG1411YRUZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
220μA Supply Current
Bandwidth: 170MHz
ADG1411YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1411YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Channelized and Unchannelized DS3 applications
- PBX interfaces
- Data switching
- Audio and video routing
- Relay replacements
- Microprocessor Controlled Analog Systems
- Automotive applications
- Digital access cross connects
- Battery Powered Instruments
