ADG1412YCPZ-REEL7

150ns, 120ns SPST - NO 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1412 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1412YCPZ-REEL7
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 983
Description: 150ns, 120ns SPST - NO 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1412 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.97mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1412
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.97mW
Max Supply Current	380μA
Turn On Delay Time	150 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	170MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 23pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Insertion Loss (dB)	-0.35 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	510ns
Switch-off Time-Max	380ns
Normal Position	NO
Height Seated (Max)	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1412YCPZ-REEL7 Overview

Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 16 series is equipped with this electronic component. These analog multiplexers are built based on SPST - NO switching circuits. Try searching with ADG1412 if you're looking for variants. There is 1.8Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. In order for the electronic part to function properly, the lowest voltage should be 5V. If put voltage greater than 380μA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. The voltage should be at least 4.5V if you are using dual power supplies. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating voltages of 12V are compatible with the electrical part. Operating 4 inputs is required. 170MHz bandwidths enable data to be transferred.