ADG1412YRUZ

150ns, 120ns SPST - NO 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1412 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1412YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 272
Description: 150ns, 120ns SPST - NO 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1412 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.97mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1412
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.97mW
Max Supply Current	380μA
Turn On Delay Time	150 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	170MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 23pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Insertion Loss (dB)	-0.35 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	510ns
Switch-off Time-Max	380ns
Max Junction Temperature (Tj)	150°C
Normal Position	NO
On-State Resistance	1.5Ohm
Height	1.2mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1412YRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~125°C TA is the extended operating temperature. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. ADG1412 can be used to search for analog multiplexer variants. A 1.8Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V is the lowest voltage that should be fed to the electronic electronic part. When the digital multiplexer is charged above 380μA, damage can occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. There is a voltage range of 12V operating voltages for the electrical part. In order to operate the 4 inputs, there are several steps to follow. This switch operates within the bandwidth of 170MHz.