Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-VQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1.8Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
4.97mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG1413 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Test Frequency |
1MHz |
Power Dissipation |
4.97mW |
Max Supply Current |
380μA |
Turn On Delay Time |
150 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
170MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
1.8Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
550pA |
Channel Capacitance (CS(off), CD(off)) |
23pF 23pF |
On-state Resistance Match-Nom |
0.13Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
150ns, 120ns |
Insertion Loss (dB) |
-0.35 dB |
Charge Injection |
-20pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-100dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
510ns |
Switch-off Time-Max |
380ns |
Height Seated (Max) |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1413YCPZ-REEL Overview
The electrical component comes in 16-VQFN Exposed Pad, CSP packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SPST - NO/NC switching circuits. Use ADG1413 to search for variants of the digital switches. It has an internal resistance of 1.8Ohm. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 5V. A digital multiplexer may suffer damage if voltage is applied above 380μA. There is no problem with using dual supply voltage, but it should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical part is compatible with 12V operating voltages. A 4 input needs to be operated. There are 170MHz bandwidths for data transfer.
ADG1413YCPZ-REEL Features
1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 170MHz
ADG1413YCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1413YCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Relay replacements
- PDAs
- Communications systems
- Wireless Local Loop
- Power routing
- Audio and video signal routing
- Medical Instrumentation
- PDH Multiplexers
- Switching Systems
- Imaging