banner_page

ADG1413YCPZ-REEL7

150ns, 120ns SPST - NO/NC 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1413 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG1413YCPZ-REEL7
  • Package: 16-VQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 474
  • Description: 150ns, 120ns SPST - NO/NC 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1413 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-VQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 1.8Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 4.97mW
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADG1413
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 12V
Polarity Non-Inverting
Number of Channels 1
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Power Dissipation 4.97mW
Max Supply Current 380μA
Turn On Delay Time 150 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Supply Type Dual, Single
Bandwidth 170MHz
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 120 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 1.8Ohm
Min Dual Supply Voltage 4.5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 550pA
Channel Capacitance (CS(off), CD(off)) 23pF 23pF
On-state Resistance Match-Nom 0.13Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 150ns, 120ns
Insertion Loss (dB) -0.35 dB
Charge Injection -20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -100dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 510ns
Switch-off Time-Max 380ns
Height Seated (Max) 1mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADG1413YCPZ-REEL7 Overview


Shipping overseas is convenient with the electronic component packed in 16-VQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 16 pins injected into the electronic part body. Multiplexers built on a SPST - NO/NC switching circuit are built. Try searching with ADG1413 if you're looking for variants. As far as internal resistance is concerned, it has 1.8Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. If you put voltage higher than 380μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It can operate from 12V operating voltages. The electrical component supports 4 inputs. The data can be transferred over a wide range of bandwidths, called 170MHz bandwidths.

ADG1413YCPZ-REEL7 Features


1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 170MHz

ADG1413YCPZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG1413YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • Avionics test equipment
  • High-Voltage
  • Frame Relay Equipment
  • PBXs
  • Channelized and Unchannelized DS3 applications
  • Data Acquisition Systems
  • SONET
  • FTTH
  • Cable PC
  • Residential Gateways, Home Gateway/Router

Write a review

Note: HTML is not translated!
    Bad           Good