Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1.8Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
4.97mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG1413 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Test Frequency |
1MHz |
Power Dissipation |
4.97mW |
Max Supply Current |
380μA |
Turn On Delay Time |
150 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
5V~16.5V ±4.5V~16.5V |
Supply Type |
Dual, Single |
Bandwidth |
170MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
1.8Ohm |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
550pA |
Channel Capacitance (CS(off), CD(off)) |
23pF 23pF |
On-state Resistance Match-Nom |
0.13Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
150ns, 120ns |
Insertion Loss (dB) |
-0.35 dB |
Charge Injection |
-20pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-100dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
510ns |
Switch-off Time-Max |
380ns |
Drain to Source Resistance |
1.8Ohm |
Height |
1.05mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG1413YRUZ Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. A total of 16 pins are injected into the electrical part body. These analog multiplexers are built based on SPST - NO/NC switching circuits. ADG1413 can be used to search for analog multiplexer variants. An switch multiplexer with 1.8Ohm internal resistance has a value of 1.8Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 5V. The analogue multiplexer may be damaged if voltage is greater than 380μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 12V operating voltages are supported by the electronic component. In order to operate the 4 inputs, there are several steps to follow. 170MHz bandwidths enable data to be transferred. Resistivity from Drain to Source is 1.8Ohm for this electronic part.
ADG1413YRUZ Features
1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 170MHz
Drain-to-Source resistance: 1.8Ohm
ADG1413YRUZ Applications
There are a lot of Analog Devices Inc. ADG1413YRUZ Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- HDTV
- Industrial
- Avionics and Military Systems
- Precision data acquisition
- Remote wireless modules
- Access Concentrators
- High speed data transmission line cards
- Industrial and process control systems
- Multi-Line E1 Interface Cards