ADG1414BRUZ

93ns, 35ns SPST - NO 11.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG1414 24 Pins 150pA 5V 24-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1414BRUZ
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 342
Description: 93ns, 35ns SPST - NO 11.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG1414 24 Pins 150pA 5V 24-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	11.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1414
Pin Count	24
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	4.5V
Test Frequency	1MHz
Power Dissipation	2.8mW
Max Supply Current	1μA
Turn On Delay Time	93 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	12V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	256MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	11.5Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	150pA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	0.6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	93ns, 35ns
Insertion Loss (dB)	0.55 dB
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	550m Ω
Crosstalk	-75dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	320ns
Switch-off Time-Max	70ns
Normal Position	NO
Height	1.2mm
Length	7.9mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1414BRUZ Overview

The electronic component is convenient to ship overseas because it is packed in a 24-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 24 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An injection of 24 pins is performed into the body of the electrical component. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with ADG1414 to find analog multiplexer variants. An switch multiplexer with 11.5Ohm internal resistance has a value of 11.5Ohm. To find out what the 24 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 4.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. With dual power supplies, you should attach at least 4.5V. There is a voltage range of 12V operating voltages for the electrical part. A 8 input needs to be operated. A 256MHz-bandwidth can be used for data transfer.